BMMSQ - WWS-33 WOODSMAN SOLID COLOR OIL STAIN
- MSDS: BMMSQ
- Manufacturer: TRU TEST MANUFACTURING COMPANY
- Product Name: WWS-33 WOODSMAN SOLID COLOR OIL STAIN
- National Stock Number: 8010-00F021849
Product Identification
Product ID:WWS-33 WOODSMAN SOLID COLOR OIL STAIN
MSDS Date:07/25/1990
FSC:8010
NIIN:00F021849
MSDS Number: BMMSQ
Responsible Party
CARY, IL 60013
Emergency Phone: 1-800-228-5635
Info Phone: 1-800-639-5383
Cage: TRUTE
Contractor
Telephone: 708-639-5383
Cage: TRUTE
Ingredients
2-BUTOXYETHANOL (ETHYLENEGLYCOL MONOBUTYL ETHER), BUTYL
CAS: 111-76-2
RTECS: KJ8575000
Fraction By Weight: 10%
OSHA PEL S, 50 PPM
ACGIH TLV: S, 25 PPM; 9293
<350 GM/L
RTECS: 9999999VO
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES/SKIN: IRRITATION. INHALATION:
NOSE, THROAT, MUCOUS MEMBRANS OF THE RESPIRATORY TRACT IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES/SKIN: IRRITATION. INHALATION: NOSE,
THROAT, MUCOUS MEMBRANS OF THE RESPIRATORY TRACT IRRITATION.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. SKIN: REMOVE W/SOAP & WATER.
EYES: FLUSH IMMEDIATELY W/PLENTY OF WATER. INGESTION: GIVE 1 OR 2
GLASSES OF WATER TO DILUTE. DON'T INDUCE VOMITING. OBTAIN MEDICAL
ATTENT ION IN ALL CASES.
Fire Fighting
Flash Point:<200F
Extinguishing Media:FOAM, CO2, DRY CHEMICAL, OR WATER FOG.
Fire Fighting Procedures:USE WATER TO COOL CLOSED CONTAINERS TO PREVENT
PRESSURE BUILD-UP & EXPLOSION WHEN EXPOSED TO EXTREME HEAT.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT.
Accidental Release
Spill Release Procedures:DIKE & CONTAIN SPILL W/INERT MATERIAL SUCH AS
SAND, EARTH, ETC. TRANSFER THE LIQUID TO CONTAINERS FOR RECOVERY OR
DISPOSAL.
Handling
Handling and Storage Precautions:KEEP FROM FREEZING. DON'T TAKE
INTERNALLY.
Other Precautions:AVOID CONTACT W/SKIN.
Exposure Controls
Respiratory Protection:NONE REQUIRED IF GOOD VENTILATION IS MAINTAINED
WHEN BRUSING OR ROLLING. DURING SPRAY APPLICATION, USE AN APPROVED
MECHANICAL FILTER RESPIRATOR TO REMOVE AIRBORNE PARTICLES OF
OVERSPRAY.
Ventilation:SUFFICIENT TO KEEP AIR CONTAMINANTS
Eye Protection:SAFETY GLASSES & SPLASH GUARDS
Other Protective Equipment:EYEWASH FACILITY, PROTECTIVE CLOTHING
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. WASH HANDS BEFORE EATING, SMOKING OR USING WASHROOM.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:212F
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:EXTREME HEAT & FREEZING
Disposal
Waste Disposal Methods:LIQUID MATERIAL & CONTAMINATED DIKING MATERIAL
SHOULD BE LANDFILLED ACCORDING TO CURRENT LOCAL, STATE & FEDERAL
REGULATIONS. KEEP SPILL OUT OF SEWERS & OPEN BODIES OF WATER.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.